(ASCEND) pipeline 50-Model 56LS

[WALUKONIS <WALUKONIS@aol.com>]

March 8th 1998


Setting up two pipeline 50, model 56LS's between two networks.Ordered 64k
circuits from the phone company. They use RJ45C's for the demarc. This
provides wiring for the circuit on pins 1&2 and 7&8. The cable that came with
the pipeline has a RJ11 to a RJ45 and both ends are wired on the inside 4
pins. This won't work. What is the pinout on the pipeline (WAN plug) for a
dedicated 4-wire circuit??? and do you provide a 8pin, 8wire cable wired
straight through??
Also, there is no where to set up the LS56 to 64K in the setup. The vendor of
this product said it will do 64K.
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: (ASCEND) Disconnect Code 35?
• Next by Date: Re: (ASCEND) More K56Cards failures...
• Prev by thread: Re: (ASCEND) Pipe 75 analog voice features
• Next by thread: (ASCEND) Disconnect Code 35?
• Index(es):
  • Main
  • Thread