Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Re: NAT ??
At 01:38 PM 3/1/98 +0100, Rob Dirksen wrote:
>Destination Gateway IF Flg Pref Met Use Age
>0.0.0.0/0 193.78.120.23 wan3 Sn 100 1 1 95
Default gateway has been picked up on the WAN connection when you are
connected.
>192.168.100.100/30 - ie0 C 0 0 1712 530
>192.168.100.102/32 - local CP 0 0 498 530
You have configured the Pipeline with a local address of 192.168.100.102
and specified a /30 netmask....just curious, why /30 - I use /24 since they
are local addresses and it both simplifies the routing table and allows for
a LOT of expansion ;)
>193.78.120.0/25 193.78.120.23 wan3 rTn 100 1 1 95
This one has me a little confused....do you also have a static route for
the 193.78.120.0 network on the Pipeline?
>natAssignAddress:natInetAddr 193.78.121.164
This is the address that was assigned to you by the server (from an IP pool?)
>NATLAN_SINGLE_IP natRouteUpdate: adding default route to 193.78.120.23
The default route is made active pointing to this connection....
Can you maybe send us the information you set in the Pipeline?
LAN address/netmask, static route entries, NAT setup options.
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: