Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) NAT ??
I'm not sure about your config, but if you only have one PC behind the
Pipeline, you should put it's IP address in the def server parameter under
NAT. I know this is in 6.0, but I'm not sure about 5.1.
At 01:38 PM 3/1/98 +0100, Rob Dirksen wrote:
>Hi all,
>
>I am out of options, please help.
>I'm trying to setup my p50 5.1A for internet access.
>My PC is talking fine to the pipe, so far so good. The pipe is talking
>with NAT to the ISP, at least I think so because the connection is
>stable,
>but mu browser is not getting any data.
>
>I cleared the p50 with fclear and nvramclear to be sure not to hit any
>old configs and then followd page 895 to the letter. When I launche my
>browser,
>the pipe sets up a connection, and from what I can see from the NATTOgle
>a IP address is given to my pipe. The browser however can't find any
>page
>nor with IP number addressing nor with name addressing.
>
>any ideas?
>can I test from termserv mode the connection with the ISP ?
>
>thanks
>Rob
>
>ascend% iproute show
>
>Destination Gateway IF Flg Pref Met Use
>Age
>0.0.0.0/0 193.78.120.23 wan3 Sn 100 1 1
>95
>127.0.0.0/8 - bh0 CP 0 0 0
>686
>127.0.0.1/32 - local CP 0 0 0
>686
>127.0.0.2/32 - rj0 CP 0 0 0
>686
>192.168.100.100/30 - ie0 C 0 0 1712
>530
>192.168.100.102/32 - local CP 0 0 498
>530
>193.78.120.0/25 193.78.120.23 wan3 rTn 100 1 1
>95
>193.78.120.0/25 193.78.120.23 wan3 *SG 120 7 5
>530
>193.78.120.23/32 193.78.120.23 wan3 rTn 100 1 0
>95
>193.78.120.23/32 193.78.120.23 wan3 *S 120 7 2
>530
>224.0.0.0/4 - mcast CP 0 0 0
>686
>224.0.0.1/32 - local CP 0 0 0
>686
>224.0.0.2/32 - local CP 0 0 0
>686
>224.0.0.5/32 - bh0 CP 0 0 0
>687
>224.0.0.6/32 - bh0 CP 0 0 0
>687
>224.0.0.9/32 - local CP 0 0 0
>687
>255.255.255.255/32 - ie0 CP 0 0 0
>530
>
>
>NAT: setXlat ifNum 4; dynamicIp 0; localIp 0.0.0.0
>natAssignAddress:natInetAddr 0.0.0.0
>natAssignAddress:DeleteAllClients
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>natAssignAddress:natInetAddr 193.78.121.164
>NATLAN_SINGLE_IP natRouteUpdate: adding default route to 193.78.120.23
>NAT: setXlat ifNum 6; dynamicIp 1; localIp 193.78.121.164
>NAT: setXlat ifNum 6; dynamicIp 0; localIp 0.0.0.0
>natAssignAddress:natInetAddr 0.0.0.0
>natAssignAddress:DeleteAllClients
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Matt Holdrege http://www.ascend.com matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: