Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) I need some help.
Hi TJ,
If the numbers below are the ones you're using then I can see how you could
have a problem.
The network portion of the IP numbers will have to be different for routing
to occur.
If both networks share the same network number then the pipeline's will not
forward the packets because it appears the destination is on the local
network. If all your numbers are in this range you'll need to use a
different subnet mask to make different networks. If you need info on subnet
masking let me know.
Scott Starbuck Aobe Network Group
-------------------------------------------------------
TJ Schuler wrote:
> I was hoping someone on this list could help me:
>
> I have never set up an ascend pipeline before and I need to setup two
> 50s and get a remote location on the network.
>
> Like I said I have two pipeline 50s running the latest firmware release.
> Everything is set up so that they can call each other and connect. The
> problem I am having is how to set these up so that the packets are
> routed or bridged correctly.
>
> The remote site has around 10 computers connected to a hub along with
> the 50. The local site has another 50 connected to one of our switches.
>
> As of right now the remote location has hard coded ips. Lets say the
> remote pipeline has an address of 257.230.59.51
>
> The Local Pipeline has an address of 257.230.59.50.
> And the main routers address is 257.230.59.254
>
> I have routing turned off and bridging turned on right now - I can ping
> from one pipeline to the other but that is basically it. Basically
> should I use routing or bridging and how do I set these things up so the
> packets are going through?
>
> Thanks
> -- TJ
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: