Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Static IP Users
Make sure that you still are doing the same type of routing as before,
under :
Ethernet->Mod Config->Ether options->RIP=???
I've experienced where upgrading a 4004 will turn RIP=OFF, this way
you won't be broadcasting your learned routes. You need to turn
on RIP.
Jason Nealis
Director Internet Operations / Network Access
Erols Internet (An RCN Company)
On Mon, 24 Aug 1998, Laurent Saehyun Kim wrote:
> Hello all,
>
> I just upgraded our MAXs (4004 and 6000) with 6.1.7. I reconfigured all
> the settings from scratch. Since then static IP users does not work. They
> will connect but can't go beyond MAX. Is there any setting that allows
> static users in 6.1.7?
>
> Here is the sample RADIUS profile:
>
> user Password = "UNIX"
> User-Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = XXX.XXX.XXX.XXX <- Static IP
> Framed-Netmask = 255.255.255.255,
> Framed-Routing = None,
> Framed-Compression = Van-Jacobsen-TCP-IP,
> Framed-MTU = 1500,
> Ascend-Maximum-Channels = 1
>
> Note: The static IP is not allocated from the IP pool used by the MAX.
> This setting worked perfectly before upgrading to 6.1.7 from 6.0.
>
> Thanks,
>
> Laurent
> Laurent S. Kim
> NetroPlex Internet Services
> lshkim@netroplex.com
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: