Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pinouts on P75 "WAN" jack
On Sun, 28 Sep 1997, Michael Brunetti wrote:
> Thanks for the info, I neglected to ask if the pair were polarity specific.
> I know polarity of an analog phone line is not too important, but I'm guessing
> the polarity of ISDN is. If it is important, how dangerous is it if the
> polarity is wired incorrect?
Ive used just regular phone lines and it doesnt seem to matter.
>
> Thanks,
>
> Mike
>
> At 10:13 PM 9/27/97 -0400, Phillip Vandry wrote:
> >> Can someone tell me the pinouts on the Pipeline 75 for the ISDN jack?
> >> I want to build a custom (short 1 foot) ISDN cable.
> >
> >ISDN always uses the two middle pins of the connector, whether you use an
> >RJ45 or an RJ11. This is pins 4 and 5 on an RJ45.
> >
> >-Phil
> >
> >
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: