Re: (ASCEND) Pinouts on P75 "WAN" jack

To: Phillip Vandry <vandry@Mlink.NET>
Subject: Re: (ASCEND) Pinouts on P75 "WAN" jack
From: Michael Brunetti <michaelb@gate.net>
Date: Sun, 28 Sep 1997 09:42:46 -0400
Cc: ascend-users@bungi.com
In-Reply-To: <199709280213.WAA01075@Iodine.Mlink.NET>
References: <Your message of "Sat, 27 Sep 1997 20:02:59 EDT." <3.0.3.32.19970927200259.0091d1e0@pop.gate.net>
Sender: owner-ascend-users@max.bungi.com

Thanks for the info, I neglected to ask if the pair were polarity specific.
I know polarity of an analog phone line is not too important, but I'm guessing
the polarity of ISDN is.  If it is important, how dangerous is it if the
polarity is wired incorrect?

Thanks,

Mike

At 10:13 PM 9/27/97 -0400, Phillip Vandry wrote:
>> Can someone tell me the pinouts on the Pipeline 75 for the ISDN jack?
>> I want to build a custom (short 1 foot) ISDN cable.
>
>ISDN always uses the two middle pins of the connector, whether you use an
>RJ45 or an RJ11. This is pins 4 and 5 on an RJ45.
>
>-Phil
>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

Follow-Ups:

Re: (ASCEND) Pinouts on P75 "WAN" jack

From: David Lesher <wb8foz@nrk.com>

Re: (ASCEND) Pinouts on P75 "WAN" jack

From: Phillip Vandry <vandry@Mlink.NET>

Re: (ASCEND) Pinouts on P75 "WAN" jack

From: Jake Messinger <jake@ams.com>

References:

Re: (ASCEND) Pinouts on P75 "WAN" jack

From: Phillip Vandry <vandry@Mlink.NET>

Prev by Date: Re: (ASCEND) Booting Users via SNMP
Next by Date: (ASCEND) Re: Pinouts on P75 "WAN" jack
Prev by thread: Re: (ASCEND) Pinouts on P75 "WAN" jack
Next by thread: Re: (ASCEND) Pinouts on P75 "WAN" jack
Index(es):
- Main
- Thread