Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Three Retrains



-----Original Message-----
From: Kevin Smith <kevin@ascend.com>
To: Ascend User-Group <ascend-users@bungi.com>
Cc: Ascend Users <ascend-users@bungi.com>
Date: Thursday, September 25, 1997 3:17 AM
Subject: Re: (ASCEND) Three Retrains



>At 02:48 PM 9/24/97 -0400, Alex P wrote:
>>Hi, I can confirm that it's happening with frightening
regularity, as can
>>my tech support people.
>
>Is it being reported across the board, or more prevalent
with the USR modems?
I cannot confirm this but it appears across the board
with any modem.

>
>Are these particular clients 'forcing' the rate to 28,800 ?
>
I have seen it with different rates from 26400 to 33600.
It just happened that the one I pasted was all 28800.

Talbert K. Coker

>>Kevin, do you know if this has been reported to Rockwell
yet, or if we can
>>expect any resolution before the next code release from
them?
>
>Rockwell are aware of this report, but I don't think
they've heard it from
>elsewhere....I'm checking with our contacts.
>
>>Thanks,
>>
>>Alex P
>>
>>On Wed, 24 Sep 1997, Talbert K. Coker wrote:
>>
>>>  I think that this has been touched on but I am seeing
>>> a lot of this and users are starting to complain about
>>> being dropped.
>>>
>>> TERMINATION REASON.......... 3 RETRAINS
>>> LAST TX rate................ 28800 BPS
>>> HIGHEST TX rate............. 28800 BPS
>>> LAST RX rate................ 28800 BPS
>>> HIGHEST RX rate............. 28800 BPS
>>> PROTOCOL.................... LAPM
>>> COMPRESSION................. V42Bis
>>> Line QUALITY................ 127
>>> Rx LEVEL.................... 049
>>> Highest Rx State............ 67
>>> Highest TX State............ 67
>>> EQM Sum..................... 0034
>>> RBS Pattern................. FF
>>> Rate Drop................... FF
>>> Local Rtrn Count............ 02
>>> Remote Rtrn Count........... 00
>>> V8bis  not successful
>>>
>>> Why should 3 retrains be the limit if I am reading this
>>> right
>>> and is there anything I can do about it?
>>>
>>> Running max 4048 w/PRI - ap23



++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>