Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Max4000 can't see Cisco 3620 with RIP
I'm having this really strange problem.. Got a Cisco 3620 and two MAX
4000's running RIP2.
The MAX's can see routes from each other via RIP, but the Cisco can't
see anything. All three are on the same /27 network and connect via an
ethernet switch. The Cisco is using eth0/0. I've even tried OSPF and the
same thing happened. Configs are as follows..
MAX 4000's:
Ethernet -> Mod Config -> Ether Options
RIP=Both-v2
RIP2 Use Multicast=No
Ethernet -> Mod Config
RIP Policy=Poison Rvrs
RIP Summary=No
Cisco 3620:
router rip
version 2
passive-interface Serial0/0
passive-interface Ethernet1/0
passive-interface Serial1/0
passive-interface Serial1/1
network 195.200.12.0
interface Ethernet0/0
ip rip receive version 2
Any ideas? Its really beginning to bug me now.. I'm running 11.2(4) on
the Cisco, 5.0Ap16 on one MAX and 5.0Ap11 on the other.
Alex
--
+--------------------------------------------------------------------+
| Alex Kinch Network Operations |
| alexk@ftech.net / +44 7050 603 259 Frontier Internet Services |
+--------------------------------------------------------------------+
| Frontier Internet Services Ltd - Disclaimer; |
| |
| All statements made and agreements come to by means of email are |
| at all times subject to Frontier's Terms and Conditions of service |
| and product descriptions / sales literature. Representations made |
| above and beyond those contained there in are not to be relied |
| upon and are at no time contractually binding. |
+--------------------------------------------------------------------+
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: