Re: (ASCEND) Keeping a p50 connected

To: systems@e-z.net
Subject: Re: (ASCEND) Keeping a p50 connected
From: "Tony Fogle [Neosoft Staff]" <tony@neosoft.com>
Date: Fri, 12 Sep 1997 15:40:14 -0500 (CDT)
cc: Ascend Users <ascend-users@bungi.com>
In-Reply-To: <Pine.BSI.3.95.970912092317.22680A-100000@e-zone.e-z.net>
Sender: owner-ascend-users@max.bungi.com

Assuming your pipeline is running at least 4.6C, you can go to
Ethernet/Connections/profile_name/Telco Options and set Call Type to
Perm/Switched.  This will make sure that one channel stays connected.

On Fri, 12 Sep 1997 systems@e-z.net wrote:

> 
> I have client with Pipeline 50 that needs to always be connected so that
> can receive inbound traffic.  They are connecting to a Max 4048 on my end.
> I currently can not make outbound ISDN calls due to a telco issue, (We are
> in US Worst territory, what else needs to be said?) so I need to have some
> way of keeping his connection up.
> 
> We've tried tricks like continuously pinging our server via the pipeline
> or having them configure an e-mail client to check for mail every couple
> of minutes, but they are not really happy with these solutions.  I
> promised them a connection that would stay up or reconnect imeadiatly if
> it goes down.  How can I deliver this?

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

(ASCEND) Keeping a p50 connected

From: systems@e-z.net

Prev by Date: (ASCEND) Aspen modems!?
Next by Date: Re: (ASCEND) MAX stacking
Prev by thread: Re: (ASCEND) Keeping a p50 connected
Next by thread: Re: (ASCEND) Keeping a p50 connected
Index(es):
- Main
- Thread