Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) connection dies with MAX4060...
Paul Rhodes wrote:
>
> Recently got a MAX4060 with 4x16 K56Flex modem cards in. However, we are having quite a few problems with them.....
>
> 1. Often the MAX4060 will not negotiate a DUN PPP connection on the first
> attempt. This is fairly strange because the machine is running an
> equivalent config to our old 4002 which works fine (running 5.0Ap4)
Try this : Ethernet - Tserv - Modem Modulation=v.34.
>
> 2. When a connection is made, you will ocassionally have a dead period of
> your connection, where no data with flow in either direction along the
> PPP link. The connection will not break, and if you hang around for
> 2-3 minutes, normal transmission will resume again.
Answer - Encaps - TCP-Clear=yes
>
> The Max in question is running 5.0Ap16 (it ran 5.0Ap20 beforehand but I dropped
> back a revision because of the radius accounting bug). Users are authenticated
> using radius 1.16 running on Solaris 2.5.1.
>
> Gone through the settings a number of times and can't see anything wrong with
> them. Any help would be much appreciated....
>
> thanks in advance.
>
> Paul Rhodes
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
--
It's easier to make a working system efficient than
to make an efficient system work.
***************************************************
K.R.Kumar email:krkumar@pacific.net.sg
Pacific Internet Pte Ltd., Phone:872 0322
89 Science Park Drive Fax :773 6812
#04-09 / 12 The Rutherford,
Singapore Science Park,
Singapore - 118261.
***************************************************
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: