Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) connection dies with MAX4060...
Recently got a MAX4060 with 4x16 K56Flex modem cards in. However, we are having quite a few problems with them.....
1. Often the MAX4060 will not negotiate a DUN PPP connection on the first
attempt. This is fairly strange because the machine is running an
equivalent config to our old 4002 which works fine (running 5.0Ap4)
2. When a connection is made, you will ocassionally have a dead period of
your connection, where no data with flow in either direction along the
PPP link. The connection will not break, and if you hang around for
2-3 minutes, normal transmission will resume again.
The Max in question is running 5.0Ap16 (it ran 5.0Ap20 beforehand but I dropped
back a revision because of the radius accounting bug). Users are authenticated
using radius 1.16 running on Solaris 2.5.1.
Gone through the settings a number of times and can't see anything wrong with
them. Any help would be much appreciated....
thanks in advance.
Paul Rhodes
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: