Re: (ASCEND) Re: Telnetting to P130 using NAT

[<mel@becknet.com>]

>most likely you are NAT on the ethernet interface. However you should be 
>able to telnet to the WAN interface address. If you dont have a WAN 
>interface address setup, you should for MANY reasons.  With a Framerelay 
>connection most likely you will have a wan interface.

Todd,

  The situation is that I'm on the Cisco side of the FR connection trying 
to telnet into the Ascend. NAT doesn't run on an interface, it runs in 
the router and does address translation between two interfaces. But the 
essence of what we're trying to do is simple: remotely access an Ascend 
router that is running NAT between the Ethernet and Frame Relay 
interfaces. It doesn't seem to want to allow that (although logically it 
should if we map to an interface on the Ascend box).

 -mel



++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) What's the bug in 5.0Ap20?
• Next by Date: Re: (ASCEND) Telnetting to a P130 using NAT over FR
• Prev by thread: (ASCEND) Re: Telnetting to P130 using NAT
• Next by thread: (ASCEND) Utility for detail-File
• Index(es):
  • Main
  • Thread