(ASCEND) Re: Telnetting to P130 using NAT

To: ascend-users@max.bungi.com
Subject: (ASCEND) Re: Telnetting to P130 using NAT
From: Todd Romero <toddr@user2.mnsinc.com>
Date: Thu, 11 Sep 1997 09:55:10 -0400 (EDT)
In-Reply-To: <199709110545.WAA09844@max.bungi.com> from "owner-ascend-users-digest@max.bungi.com" at Sep 10, 97 10:45:13 pm
Sender: owner-ascend-users@max.bungi.com



most likely you are NAT on the ethernet interface. However you should be 
able to telnet to the WAN interface address. If you dont have a WAN 
interface address setup, you should for MANY reasons.  With a Framerelay 
connection most likely you will have a wan interface.


> 
> ----------------------------------------------------------------------
> 
> From: <mel@becknet.com>
> Date: Wed, 10 Sep 97 17:08:36 -0700
> Subject: (ASCEND) Telnetting to a P130 using NAT over FR
> 
> I've got a P130 configured to use NAT over FR (5.0Ai23). It appears to 
> work OK, but I can't telnet to the router from the outside world. I know 
> that NAT over ISDN didn't support telnet, but at least the term-serv 
> "remote" command worked. But this P130 connects to a Cisco via FR, and so 
> the remote command isn't available. I tried mapping the telnet port to 
> the router's IP address, but no go.
> 
> How is one supposed to conduct remote support a P130 doing NAT over FR?
> 
>  -mel
> 
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

Prev by Date: (ASCEND) Utility for detail-File
Next by Date: (ASCEND) Telnetting to a P130 using NAT over FR
Prev by thread: Re: (ASCEND) Telnetting to a P130 using NAT over FR
Next by thread: Re: (ASCEND) Re: Telnetting to P130 using NAT
Index(es):
- Main
- Thread