Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) DOVBS?
At 12:47 PM 9/10/97 -0400, Jason Nealis wrote:
> Ok, I'm trying to implement data-over-voice, I have 4 pri's in one
>hunt group, I have recieved my MSN# for that hunt group and done
>the following configuration changes in my Max.
>
> entered 7138 in the /ethernet/modconfig/wan options/Ans 1#
> and
> 9711 in the /<modem slot>/modconfig/Ans 1# .....
>
>9711 is the orginal hunt group for both ISDN and Analog callers. Here is
>my question, If I implement 9711 in modemconfig/Ans 1# will the Max 4xxx
>still terminate digital calls on that 9711 number? Or will digital only
>be permitted on 7138?
>
>It seems that the Max will not terminate digital calls on the number
>determined in /modemconfig/. So who can I tell the max to terminate both
>analog and digital calls on 9711 and only digital on 7138?
To understand how DOVBS works, you need to understand how ISDN works. Each
ISDN call is flagged as Circuit switched data or circuit switched voice.
The Max detects this flag and routes the call to the modem (voice) or
ethernet (data).
Now with DOVBS, the call comes in as voice so you must use another routing
method other than the CSD flag. So you match the dialed number string to
route the DOVBS call to the Ethernet. If you do this, you obviously cannot
use one number for voice and data calls.
Comprende?
Matt Holdrege - http://www.ascend.com - matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: