Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Zoom 1.002A code
Hi,
We have tested Hayes Accura with firmware code V0.520Ahy_
on 5.0Ap20 , connected at 56K
At&v1 result shows
Highest Tx - 31200 bps
Highest Rx - 56000 bps
Joe Portman wrote:
>
> On Fri, 29 Aug 1997, Jake Messinger wrote:
>
> > On Fri, 29 Aug 1997, Joseph Bridgewater wrote:
> >
> > > It's the signal power level allowed to be placed onto the phone network.
> > > In order to achieve a 56k connection, the signal would require higher power
> > > to be applied to the network. FCC regulations limit the power level to a
> > > point that only allows 53k connections.
> >
> > Okay so the FCC specified the signal power and not the actual K thruput.
> > I figured so. So kflex CAN or cannot do 56k? And x2 CAN or CANNOT do 56k?
> > And why am I even asking when the FASTEST Ive seen so far is 44k.
>
> I've seen 52K on a K56flex line. Seen 50K a bunch of times. I get at least
> 48K each and every time on a very clean line (pots jack of ISDN TA).
>
> No one has reported a 54K or 56K connection and quite frankly, I don't
> ever expect to see one outside of a laboratory.
>
> Later,
> Joe Portman - Alternate Access Inc. Affordable, Reliable Internet
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: