Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) My connections profiles can't get up the connection
Hello
I have a MAX TNT with softwate version 1.3Ap5 and I'm working with channelized
E1.
Well the situation is this the statistics say that my E1 is up and in TE state
with all the nailed channels in up too, but when i active the connections
profiles this connections don't go up.
I don't know what happend here because for this test I'm using a E1 that is
working in a MAX 4000 and is using the same profiles configured in the TNT.
My E1 in the TNT is configured with this profile:
enabled = yes
t-online-type = te
t302-timer = 1500
frame-type = 2ds
clock-source = eligible
clock-priority = middle-priority
signaling-mode = e1-no-signaling
default-call-type = digital
switch-type = switch-cas
front-end-type = short-haul
channel-config = [ { unused-channel 0 "" { any-shelf any-slot 0 } 0 } { nailed-+layer3-end = x-side
layer2-end = b-side
nl-value = 64
loop-avoidance = 7
number-complete = end-of-pulsing
group-b-signal = signal-b-6
group-ii-signal = signal-ii-2
answer-delay = 10
caller-id = no-caller-id
Here I'm using the frame type 2ds because with the frame type g.703 the E1
can't work, because the E1 can't get his synchronization.
Well and it's one of my connections profiles:
station* = ITDG_CD:4051
active = yes
encapsulation-protocol = ppp
called-number-type = national
dial-number = ""
clid = ""
ip-options = { yes no 161.132.250.158/30 161.132.250.157/30 1 0 120 yes no 0 0.+
bridging-options = { 0 no }
session-options = { "" "" no 120 no-idle 120 "" 0 }
telco-options = { ans-and-orig no ft1 1 no no 64k-clear 0 "" "" no no }
ppp-options = { no-ppp-auth "" "" none 1524 no 600 600 }
mp-options = { 1 1 2 }
mpp-options = { "" quadratic transmit 1 1 15 5 10 70 }
fr-options = { "" 16 "" no "" 16 }
tcp-clear-options = { "" 0 no "" 256 20 }
usrRad-options = { global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber = ""
tunnel-options = { disabled 0 "" "" 5150 "" "" }
with ip-option
ip-routing-enabled = yes
vj-header-prediction = no
remote-address = 161.132.250.158/30
local-address = 161.132.250.157/30
routing-metric = 1
preference = 0
down-preference = 120
private-route = yes
multicast-allowed = no
address-pool = 0
ip-direct = 0.0.0.0
rip = routing-off
route-filter = ""
ospf-options = { no 0.0.0.0 normal 30 120 5 simple ******* 10 1000 type-1 c0:00+
multicast-rate-limit = 100
client-dns-primary-addr = 0.0.0.0
client-dns-secondary-addr = 0.0.0.0
client-dns-addr-assign = no
client-default-gateway = 0.0.0.0/0
and telco-option
answer-originate = ans-and-orig
callback = no
call-type = ft1
nailed-groups = 1
ft1-caller = no
force-56kbps = no
data-service = 64k-clear
call-by-call = 0
billing-number = ""
transit-number = ""
expect-callback = no
dialout-allowed = no
I apprecite if you could help me to solve this problem or if you could give
me some advice about it.
Reagards,
Enrique
--
Atentamente.
*******************************************************************************
Enrique Josue Torres Angeles eta@rcp.net.pe
Dept. de Proyectos Lima - Peru
Dept. de Operaciones
Red Cientifica Peruana Telefono : 51-1-9544799
Av. Larco 770 - Miraflores 51-1-2415689
3er Piso Fax : 51-1-2411320
*******************************************************************************
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>