Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Restricting connections with RADIUS
NAS-Port-Type is an expect parameter.
blah Password = "bleh", NAS-Port-Type = Async
User-Service = Framed-User,
Framed-Protocol = PPP,
Framed-Routing = None,
Ascend-Maximum-Channels = 1,
Ascend-Maximum-Call-Duration = 480,
Ascend-Idle-Limit = 1200
> On Thu, 17 Jul 1997, Knoel Ralston wrote:
>
> > Livingston RADIUS 2.01 support port type declairations of,
> > VALUE NAS-Port-Type Async 0
> > VALUE NAS-Port-Type Sync 1
> > VALUE NAS-Port-Type ISDN 2
> > VALUE NAS-Port-Type ISDN-V120 3
> > VALUE NAS-Port-Type ISDN-V110 4
> > (pulled right fromour dictionary file)
> >
> > I cannot say anything about limiting 56k, but this will take
> > care of ISDN vs. Analog
>
> Still no dice.
>
> I've upgraded our TNT to 1.3Ap2, livingston radius 2.01, and this in the
> radius file:
>
>
> blah Password = "bleh"
> User-Service = Framed-User,
> Framed-Protocol = PPP,
> Framed-Routing = None,
> Ascend-Maximum-Channels = 1,
> Ascend-Maximum-Call-Duration = 480,
> NAS-Port-Type = Async,
> Ascend-Idle-Limit = 1200
>
>
> The user still manages a 64K MPP ISDN connection. This is not good :)
> Not good at all....
>
> I want this guy to connect ONLY at 33.6K analog.
>
>
> later......
> jsb
>
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: