Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) RE: netware server connection
Most likely the FRAME type isnt set correctly on one of the side. Also,
make sure the remote side has a UNIQUE IPX network # in the mod config.
The side with the server doesnt have to have an IPX network # in the mod
config like the remote does. Make sure route ipx=yes in the connection
profile also. and that peer=router in the ipx options in the connection
profile.
>!>!>!>!> Also, I dont think netware 3.11 responds to the IPXPING that
Ascend and ciscos have.<!<!<!<!<!<!
The best thing to try is a netware client on your remote workstation.
>from: Robert Dirksen <rddirkse@pi.net>
>Date: Wed, 13 Aug 1997 21:24:17 -0700
>Subject: (ASCEND)netware server connection problem
>
>Hi,
>
>I checked the FAQ list which contains a lot of info, but didnot find an
>answer to my problem. Compliments for the maintainer of this list.
>
>My Novell 3.11 server is connected to a pipeline 50. When I show netware
>servers, I get the network name and node name as expected. Also show
>netware networks returns valid information.
>
>When I try from a remote PC via a pipe50 to connect to the server it
>does not respond. Also IPXPING servername from the remote site does not
>come back with any information, while show netware networks and show
>netware servers show that the remote pipe sees the server (or at least
>the exchange the tables).
>
>What could be wrong on the server site with either the configuration of
>the pipe or the server.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>