Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) LOTS of c=185
Somewhere along the line I was told that a more accurate method of processing calls is to look at the disconnect code in combination with the progress code. Unfortunately, with type 185 we have not yet created a matrix of disconnect and progress codes.
As soon as I get one you'll all hear about it!
Ken Packert
Network Management Division
Ascend Communications
516 468 4810
www.ascend.com
-----Original Message-----
From: Kevin Smith [SMTP:kevin@ascend.com]
Sent: Wednesday, August 13, 1997 1:55 PM
To: ascend-users@max.bungi.com
Subject: Re: (ASCEND) LOTS of c=185
At 05:02 PM 8/13/97 +0200, Manfred Kwiatkowski wrote:
>Cyril Jaouich <twiggy@twiggy.ican.net> writes:
>>
>> We are having pretty much the same problem here, Max4004 running
>> Software +5.0Ap5+. We get this too often with different modem brands.
>> I've talked with Ascend-TS before here's the reason for this code:
>> - --
>> 185 Remote End Hangup: When the user hits the hang-up or disconnect
>> button.
>
>Nonsense. An access server speculating about user buttons...
This is not nonsense. The definition was "Remote End Hangup", what follows
is examples of what can cause it. The remote modem being disconnected is
one of them.
>At least they should not call this "technical support."
Hmm ?
>> My question is HOW does it determine the user has hung-up? Modem
>> carrier going low? LCP close sent? No activity on link?
The MAX received a hang-up indication without LCP closing (different code).
As was suggested, this could be the remote end hanging up without closing
down the session first, or a telco problem - like the line just dropped.
(turn off the remote modem, and you'll likely get this reason code - I found
out by accident).
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: