Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Re: ascend-users-digest V96 #738
I said:
>> Wire Size Max Distance to CSU/DSU, Pipeline, or Max/TNT/GRF
>> --------- -------------------------------------------------
>> #26 Wire 9,000 ft maximum
>> #24 Wire 12,300 ft maximum
>> #22 Wire 16,060 ft maximum
>> #19 Wire 22,730 ft maximum (#19 is "common" in Europe they say)
...and David Moon said:
>I'm pretty sure that the PairGain device is using HDSL on the telco
>side to deliver T1 to you on the customer side.
Yes, exactly.
>The table above looks like the maximum distance for HDSL, i.e, the
>maximum distance between you and the telco central office.
Uhhh... this would mean that PairGain's Raleigh, NC engineering
staff did not understand my question at all.
>The T1 interface toward you is probably DSX-1 which is limited to
>about 1200-1300 ft.
Even 1,000 feet is longer than I needed to run the RJ-48,
but now you have me wondering if the phrase "maximum length
of the customer premise RJ-48 cable between the PairGain
HRU-412 Issue 1 Remote Unit at the customer premise and
the customer's CSU/DSU" has more than one possible meaning.
I will check with them (again), and report back.
So much for my attempt to make life easier for the group.
I think I'll shut up and go back to slogging though the
mess in my lab... Anyone need a Pipeline 130 manual? I've got
untouched extras lying around underfoot, and they go to the
most imaginative swap offer.
"Next week, we are playing the Mozart..." "Are you sure we can Handel it?"
james fischer jfischer@supercollider.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>