(ASCEND) 5.0Ai13 tik.m40 a bad idea

To: ascend-users@bungi.com
Subject: (ASCEND) 5.0Ai13 tik.m40 a bad idea
From: Phillip Vandry <vandry@Mlink.NET>
Date: Wed, 6 Aug 1997 08:49:33 -0400 (EDT)
Sender: owner-ascend-users@max.bungi.com

Just a small problem report...

I loaded 5.0Ai13 tik.m40 into a Max to replace the 5.0Ai13 tbi.m40 it
already had while swapping modems. It worked terribly.

When the modem answers, there is a loud 5-10 Hz clicking (noise) sound.
Needless to say, you can't connect. Additionally, the T1s go into Yellow
Alarm state every few minutes.

Rebooting and reseating the cards didn't help. I solved the problem by
going to 5.0Ap13.

I hope this problem in the incremental goes away before the next release.

-Phil
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

Prev by Date: Re: (ASCEND) pipeline 50 at Alcatel PBX
Next by Date: (ASCEND) V120 on 5.0Ap16
Prev by thread: Re: (ASCEND) V120 on 5.0Ap16
Next by thread: (ASCEND) modem speed discrepancy
Index(es):
- Main
- Thread