Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) disabling modems
> While the below is true, my experiences are that while 1 modem is
> "disabled," the disabled modem is 1 of 24 that are associated with
24
> incoming T1 channels. What happens to us, in this situation, is
that when
> 23 calls are in progress all is fine. When the 24th call comes in
for the
> now disable modem, the 24th call rings but is never answered. I
would
> _want_ it to ring busy, and then hunt around the bad modem to our
next
> Ascend MAX, but it does not.
We found that with CT1 we have to disable the modem AND set one
channel (any channel) on one of our T1's to "unused". This will busy
out a channel. We did get a call from U S Worst a few weeks later
about a channel with no wink on it... right on the ball, those
folks.
I'm told the "disable modem+chan" setting works with PRI.
Dale
-----------------------------------------------------------------
Dale Botkin, President | Internet Services for Mid-America
Probe Technology Inc. | Voice (402) 593-9800
10159 J St. | FAX (402) 593-8748
Omaha, NE 68127 | http://www.probe.net/
-----------------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>