Hi, I am currently utilizing an Actiontec Q1000 modem in accordance via the CenturyLink Internet Service Provider and I have installed a Netgear WNR2000 wireless router behind the Actiontec Q1000 modem <-aka 'gateway' 'for my wireless routing purposes'. Upon entering the 'Gui' interface of/on the Actiontec Q1000 modem via 'Firefox web browser' entering the following command: 192.168.0.1 --> Advanced Setup --> IP Addressing --> DHCP Reservation --> I have noticed two reserved addresses - under 'DHCP Reservation' listed as the following below: 1. 192.168.0.2 00:16:d4:4a:9c:e9 192.168.0.2 2. 192.168.0.3 00:1d:7d:56:c7:fa 192.168.0.3 Questions - 1a. Is it necessary to keep the above two addresses on the 'DHCP Reservation List' of the Actiontec Q1000 device? 2a. I believe I have no devices currently on the LAN utilizing the same 'MAC' address as the above 'DHCP' output has provided. Can I now safely 'remove' the above listed 'entities' from the DHCP Reservation List? 3a. As per last week I was able to return the 'leased' ZyXel c1000z and have noticed by using the newly acquired Actiontec Q1000. Speeds are the same but the device has possible 'leakage' Are you aware of ports being actively left open on the Actiontec Q1000 device by any chance? Thank you for your time, -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.mn-linux.org/pipermail/tclug-list/attachments/20150204/18c45c99/attachment.html>