I just did a quick Google search on Bluetooth access points and those are available. Yes, they are a bit costly, but curious if this would solve the apartment complex issue using wireless and if anyone has experience using one? On Feb 1, 2015 10:32 PM, "Max Shinn" <max at bernsteinforpresident.com> wrote: > > Therefore if you have something on channel 11 you can use channel 6 > > free and clear. Same with 1. But if you have anything strong on 2-5 > > and you’re on 1 or 4-9 and you’re on 6 you’re SOL. You will be > > bleeding and conflicting and upsetting your transceiver (aka AP). > > The problem is worse when you have many of these routers. I have a > friend who lives in an apartment building that gets internet service > from Comcast. Every single unit needs to have their own wifi router, > and so every unit is broadcasting this xfinity_wifi SSID in addition to > their own SSID. It is very difficult to get a signal, (presumably) > because the pigeonhole principle mandates that there are at least 2-3 > SSIDs per channel. Obviously this is a problem in most apartment > buildings, but the effect is much greater when every person is using > two channels instead of just one. > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.mn-linux.org/pipermail/tclug-list/attachments/20150201/8f5f1479/attachment.html>