Pulling the drives & sticking them in a PC might let you talk to the drive(s). I think that it is likely that the box is using the mdraid software raid system, which nearly any distribution will support. Good luck. Thomas On May 6, 2014 5:52 PM, "Robert Sinland" <rsinland at gvtel.com> wrote: > This is a sort of Linux related topic as this NAS device runs an embedded > Linux OS. > I recently got a good deal on one of these on ebay and popped in one 1 > terrabyte drive which the machine formatted and away we went quite nicely :) > I later added a second drive of the same size and tried to build a raid > using the devices web interface. During this process the second drive > failed. > Now when I try to log in to do any configuration the unit takes me to a > configuration wizard that want me to select a new raid arrangement. All > well and good, > except that the "busy" indicator on the web page never goes away and it > wont let me select any of the options. I have been googling for a few days > looking for some command line solution to this with no luck. I'm just > throwing this out there in case one of you had any ideas. > I have added in another good drive, removed all drives etc to no avail so > far. > Thanks for any ideas :) > Rob > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.mn-linux.org/pipermail/tclug-list/attachments/20140506/b3da4dbf/attachment.html>