I just set a config like this up, I used Adtran bridging routers at either end of the PTP T1. Much easier and more flexible than IPv4 routing, and at $650 each a great deal compared to Linux boxes with T1 cards. kevin wrote: > Hello- > > A friend of mine (really, it's not me!) has gotten himself in too deep on a > project. > > Basically, a client of his has two locations. They want to run a T1 between > the locations, and then from one office run a T1 connection to the Internet. > Unfortunately, he know nothing about routers. > > While there might be better solutions, I was wondering if he could set > something up like this: > > 1. site 1 has a linux server with two NICs, one connected to the local > subnet, and one connected to the T1 subnet > 2. site 2 has a linux server with three NICs, one connected to the local > subnet, one to the T1 subnet, and the third connected to the T1 which has > Internet access. > > Could this work? > > If it would work, would I need to add static routes on the box with 3 NICs > or could it figure out how to send some traffic to the Internet and some to > the other site? > > Thanks! > Kevin > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list