I have no problems printing with mandrake and built in drivers to ML-1210 (CUPS). I will double check my config. Benjamin E. Neigebauer Software Engineer Compellent Technologies Eden Prairie, MN 55344 -----Original Message----- From: rpgoldman at real-time.com [mailto:rpgoldman at real-time.com] Sent: Monday, November 17, 2003 9:28 AM To: TCLUG Mailing List Subject: Re: [TCLUG] debugging cups >>>>> "Munir" == Munir Nassar <nassarmu at redconcepts.net> writes: Munir> On Mon, 17 Nov 2003, Ian Stoner wrote: >> more. I assumed it was a problem with the interaction between CUPS and >> SAMBA, but maybe the problem is actually the driver? Munir> heh... sounds to me like the printer is stopping to render I don't believe so --- I've gone out for hours and come home to find it still in this state. Munir> add RAM, use a better PPD(hint: MacOSX ppds work great) or Munir> dont send large jobs. I have a Samsung ML-1210 linux driver to use instead of the built-in foomatic one. I've been unwilling to do it --- after all, it KINDA works now, if I'm willing to restart more often than I should. I'm not at all convinced I'll be able to get it back to the original state if I install the Samsung drivers! And they seem to be compiled against glibc 2.1, whereas I'm on 2.3.... </sigh> _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.538 / Virus Database: 333 - Release Date: 11/10/2003 _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list