Here is an option that is just really an upgrade from what you are currently using: http://www.transition.com/products/mcon_platform/standalone/gigabit/index.ht m You may want to see if you can push multimode over your fiber. If you need more bandwidth a upgrade from single to multi sometimes is the ticket, however can be expensive. How many fibers are in you wire? Two? Four? You may also want to look into segmenting your network, taking the computers that talk to each other the most at each building and placing them on a separate segment. Just some thoughts, let me know if you want more. Eric 23/12/2003 10:41, "Jason Jorgensen" <jasonj at igi.com> wrote: > We have fiber running between our 2 office buildings. On each end of the > fiber we have one of these devices to convert to ethernet > http://www.cdw.com/shop/products/default.aspx?ProductID=247614 > > Basically it looks like a fiber (BNC connections) to RJ-45 converter. > > We are pretty sure the fiber should support 1000base with no problems. > So I am looking for a drop in replacement for the 100base converter > units. Or some local consultant or company we could get out here to put > new ends on the fiber for a non-drop in replacement converter. > > Other suggestions and comments welcome. > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list > _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list