Can you provide us with more information about your ISP, like what type of authenticaton they use? Also what you are using to connect? If you are using scripts, post what you have. Plus any error messages you get from syslog. Finally your username/password for your ISP. (J/K) On Wed, 12 Sep 2001, Shawn Fertch wrote: > Still looking for an answer to this. Paul suggested a couple of things, but > didn't work. Anyone else? Nate, Carl, Bob, etc? > > I've been reading through the different HOW-TO's to try and figure a problem > out. I posted a little bit ago asking this question, but didn't receive an > answer. I really need to get this going but can't find the answer to what > I'm looking for in the how-to's. > > Problem: I have a home LAN comprised of various OS machines (Slack 8, Free > BSD 4.2, Solaris 8, Win9x, Win2k), with the gateway machine having Slack 8 > and an external 56k modem as my connection to the internet. The gateway > machine has all of the connection information in there correctly, and I added > the following lines to the end of my rc.local file for the internal machines > to get outside: > > > ipchains -P forward DENY > ipchains -A forward -i ppp0 -j MASQ > > > With this machine connected to my LAN, I can get it to dial. I hear the ISP > pickup and the handshake begin. However, the modem hangs up because it can't > get authorization. I'm assuming that it's because when my system is trying > to authenticate to the ISP it's attempting to from my LAN instead of the ISP. > I ran into this once before on my laptop, but I just disabled my LAN and > redialed. However with the box that's dialing being my gateway, that isn't > an option. > > Below is the closest thing to an answer that I can find/think of that might > be causing this issue. IIRC, this came out of the PPPD how-to. > > <<Speaking of the options file, one of the things that MUST be in > there no matter how you start pppd is this: '192.0.2.1:XXX.XXX.XX.XX'. > What this is is 'localIPaddress:remoteIPaddress'. You need it there > because normally pppd can fill in the blank itself, but fails when > connecting to an emulator.>> > > I've read the Networking and Net How-to's but didn't seem find anything that > addresses this issue. Can someone tell me if this is the cause of my issue > why I can't successfully connect to my ISP through modem dial-in? I used to > have ISDN with this working, but I don't recall what I did previously or > where I got the information. Also, the box has been reloaded since I got rid > of my ISDN. > _______________________________________________ > tclug-list mailing list > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list