* Timothy Wilson <wilson at visi.com> [010312 20:24]: > 2. Following the directions on the Debian rescue floppy, I built a new > 2.2.18 kernel and included Compaq Smart2 support (the RAID controller) and > drivers for the each of the two SCSI chipsets that might be on the > machine. I replaced the stock rescue kernel with the new one, ran the rdev > script, and booted. The array was detected, the NIC recognized, and > everything seemed OK except that I got the exact same behavior as > before--the installer couldn't find a H.D. > Compaq SMART2 Driver (v 1.0.6) > Found 1 controller(s) > cpqarray: Finding drives on ida0 (Integrated Array) > cpqarray ida/c0d0: blksz=512 nr_blks=35553120 > cpqarray: Starting firmware's background processing > ida/c0d0: ida/c0d0p1 ida/c0d0p2 < ida/c0d0p5 ida/c0d0p6 > ida/c0d0p3 > autodetecting RAID arrays > autorun ... > ... autorun DONE. First, do what i did and read the bug against the installer, 90 days old. I'm doubting it will be fixed because the push for a new install system is in full force. :| http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=78981&repeatmerged=yes Good luck! -- Scott Dier <dieman at ringworld.org> <sdier at debian.org> http://www.ringworld.org/ #linuxos at efnet "When's the last time you used duct tape on a duct?" -Larry Wall -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20010313/ecd6f39b/attachment.pgp