I can reset the rates, but when I retrain the line rate does not change. I
assume this means it is capped at the CO, or the CO doesn't have the right
equipment?

cbos#show int wan0
wan0   ADSL Physical Port
       Line Trained
       256 Kbps down; 272 Kbps up; 136 baud
       Line Quality 45 dB
       TX Power +10.1 dB  Remote TX Power +14.3 dB

cbos#set int wan0 rate down 640 up 272 baud 340
found baud
New ADSL parameters set; up:272Kbps, down:640Kbps

cbos#set int wan0 retrain
ADSL Physical link 0 is retraining..

cbos#show int wan0
wan0   ADSL Physical Port
       Line Trained
       256 Kbps down; 272 Kbps up; 136 baud
       Line Quality 45 dB
       TX Power +10.1 dB  Remote TX Power +14.3 dB



At 10:10 AM 1/4/01 -0600, you wrote:
>46dB is very good - the person who told you otherwise should not be working
>in tech support.  You can get 256kbps below 19dB.
>
>Log into your router and try the following - check the syntax - it has been
>awhile since I have played with a 675.
>
>cbos# set int wan0 rate down 640 up 272 baud 340
>cbos# set int wan0 retrain
>cbos# write
>cbos# reboot
>
>This should set the parameters nicely for you.
>
>Then try:
>
>cbos# sh int wan0
>
>Let us know if it shows you trained at 640/272 340 baud.
>
>Tom Veldhouse
>veldy at veldy.net
>