Try different IRQs. The ne module will be happy with any IRQ, but only the right one will make it card work.

Miller, John [JMiller2 at dainrauscher.com] wrote:
> I have to do a insmod 8139, then insmod ne io=0x300 irq=5.
> That seems to make it happy.  
> 
> When the system boots, it sees both cards but does fails on
> initialization.  One card (d-link) uses rtl8329 driver, the driver is
> loaded, but I don't know how to get the other driver load because ne is
> depended on 8139 loading first.
> 
> 
> 
> John Miller
> Dain Rauscher
> Information Services - Capital Markets
> Software Developer
> Phone: 612-547-7573
> Fax:    612-547-7580
> IS - Mail Stop: T23A
> E-mail: MailTo:JMiller2 at DainRauscher.com
> 
> 
> 
> -----Original Message-----
> From: Clay Fandre [mailto:clay at fandre.com]
> Sent: Thursday, August 16, 2001 8:53 AM
> To: tclug-list at mn-linux.org
> Subject: Re: [TCLUG] networking
> 
> 
> What module does it use? Does it autodetect the IRQ and IO settings, or
> are you manually specifying them? I've had this same type of problem if
> I have the IRQ set wrong. It looks like it's working, but I can't ping
> anything remote.
> 
> johndmiller [john at mn.mediaone.net] wrote:
> > Let me start by saying I am not a networking guy.
> > 
> > One of my nic died about a week ago.  I went and replaced it with
> another
> > identical (hah) one.  It requires different drivers (so it is not the
> > same).  Long story short.  I have an d-link de220p (isa) for my
> internal
> > net card.  It does not want to talk to the other cards.  How do I get
> it
> > to speak to someone but it's self.
> > 
> > Destination   gateway       Genmask        flags
> > 192.168.0.0   *             255.255.255.0  U
> > 24.163.168.0  *             255.255.255.0  U
> > 127.0.0.0     *             255.0.0.0      U
> > default       24.163.168.1  0.0.0.0        ug
> > 
> > I don't see irq conflicts or io conflicts. I looked in
> /proc/interrupts
> > and /proc/ioports.
> > 
> > Any ideas?
> > 
> > New question.  Is it possible to copy and paste from two termial
> sessions
> > in kde?
> > 
> > Thanks
> > 
> > John Miller
> > 
> > _______________________________________________
> > tclug-list mailing list
> > tclug-list at mn-linux.org
> > https://mailman.mn-linux.org/mailman/listinfo/tclug-list
> _______________________________________________
> tclug-list mailing list
> tclug-list at mn-linux.org
> https://mailman.mn-linux.org/mailman/listinfo/tclug-list
> _______________________________________________
> tclug-list mailing list
> tclug-list at mn-linux.org
> https://mailman.mn-linux.org/mailman/listinfo/tclug-list