Quoting Mandar Vaze <mandar_v at yahoo.com>: > Yes, I'm using Cisco 675 for doing NAT. > IP Addr of my linux machine is 10.0.0.2 (Assigned by > DHCD server running on Cisco 675) > > cbos>show nat > NAT is currently enabled > Inside Global Address set to 63.228.43.76 > Inside Local Inside Global Timer Flags Protocol > 10.0.0.2:22 63.224.6.31:22 0 0x41 tcp > > This was setup for ssh connection (for other machine, > not with me anymore) > > Here's some more output: > ---------------------------------------------- > [mandar at omega mandar]$ cat /etc/nsswitch.conf | grep > hosts > #hosts: db files nisplus nis dns > hosts: files dns > [mandar at omega mandar]$ cat /etc/hosts > 127.0.0.1 omega localhost > 204.147.80.1 ns3.mn.uswest.net > 204.147.80.5 ns1.mn.uswest.net > [mandar at omega mandar]$ nslookup - ns3.mn.uswest.net > *** Can't find server name for address 204.147.80.1: > No response from server > *** Default servers are not available > [mandar at omega mandar]$ > You're running Mandrake, right? How about installing Debian? (That's what Ben would say, anyway.) Do you have a BBC? If you do, see if that works. --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org