Yes, I'm using Cisco 675 for doing NAT.
IP Addr of my linux machine is 10.0.0.2 (Assigned by
DHCD server running on Cisco 675)

cbos>show nat
NAT is currently enabled
Inside Global Address set to 63.228.43.76
Inside Local  Inside Global   Timer  Flags  Protocol
10.0.0.2:22  63.224.6.31:22    0      0x41   tcp  

This was setup for ssh connection (for other machine,
not with me anymore)

Here's some more output:
----------------------------------------------
[mandar at omega mandar]$ cat /etc/nsswitch.conf | grep
hosts
#hosts:     db files nisplus nis dns
hosts:      files dns
[mandar at omega mandar]$ cat /etc/hosts
127.0.0.1       omega   localhost
204.147.80.1    ns3.mn.uswest.net
204.147.80.5    ns1.mn.uswest.net
[mandar at omega mandar]$ nslookup - ns3.mn.uswest.net
*** Can't find server name for address 204.147.80.1:
No response from server
*** Default servers are not available
[mandar at omega mandar]$

----------------------------------------------

-Mandar

__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

---------------------------------------------------------------------
To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org
For additional commands, e-mail: tclug-list-help at mn-linux.org