> low preferrably pure DC. This can be checked with an o-scope. So, does that mean that you can use an o-scope software app on a linux box? And (to be facetious) would it be possible to rig a setup so that you could perform this test on the linux box in which that PS is installed? Andy > If you stay away from the cheapies you will probably be ok. also > remember these PS are now switching, (no transformers) so you really > can't repair them without special equip. Jerry ET USPS --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org