Here's options to get PPTP client working with a W2K server w/ encryption.. cool. -- Nate Carlson <natecars at real-time.com> | Phone : (952)943-8700 http://www.real-time.com | Fax : (952)943-8500 ---------- Forwarded message ---------- Date: Thu, 05 Oct 2000 18:51:49 -0500 From: Jerry Vonau <jvonau at home.com> To: Elijah Smith <eli at rocketvox.com> Cc: "'pptp-server at lists.schulte.org'" <pptp-server at lists.schulte.org> Subject: Re: [pptp-server] pptp client, Win2k server - problems! Hi All: This is my ppp options: lock noauth debug user USER >required for password PASSWORD >MS chap and above (sorry Adam, I was right) noauth +chap +chapms +chapms-v2 mppe-40 mppe-128 mppe-stateless start the clint form the command line: /usr/sbin/pptp SERVERIP lock noauth debug user USERNAME +chapms-v2 mppe-128 mppe-stateless noauth Replace the UPPERCASE with your info. Jerry Vonau Network Administrator Winnipeg Motor Express\ Ram Messenger Elijah Smith wrote: > > > To recap - I'm getting a "LCP: timeout sending Config-Requests" error > when trying to connect with a pptp client to a win2k server. > > there were several suggestions to change "AUTH" to "NOAUTH" in the ppp > options file. So I did this. Let me ask everyone, though - as a > client, should I include: > > +chap > +chapms > +chapms-v2 > mppe-40 > mppe-128 > mppe-stateless > > or are those not useful as a client? > > Anyway, I'm still getting the same timeout problem, but now the > request being sent looks like this: > > ...sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x409b73e3> <pcomp> > <accomp>] > ...last message repeated 9 times > ...LCP: timeout sending Config-Requests > > So, the <auth chap 81> bit is gone, but it's still dying. > > Thanks to everyone that responded, I really appreciate it! Any other > suggestions? > > Thanks! > > eli > > -----Original Message----- > From: Jerry Vonau > Sent: Thursday, October 05, 2000 7:12 AM > To: Elijah Smith > Cc: 'pptp-server at lists.schulte.org' > Subject: Re: [pptp-server] pptp client, Win2k server - problems! > > check your ppp options file if this is a client , change AUTH to > NOAUTH > > Jerry > > Elijah Smith wrote: > > > > > > > Hi, everyone - I'm trying to connect to my Windows 2000 router at > work > > with my firewall/router Linux box at home. I'm almost there - so > > close I can smell it - but I can't figure out this problem. I've > read > > back through the archives of this list, as well, but haven't seen > any > > answers to this problem... > > > > my client is: > > > > RedHat Linux 6.2 > > pppd 2.3.8 with all patches installed > > pptp 1.0.2 > > > > and the server's Win2k. I can connect with a Win98 client, no > > problem. But when I try to connect using pptp, I get: > > > > ...Connect: ppp0 <--> /dev/ttya0 > > ...Sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap 81> <magic > > 0xe6251907> <pcomp> <accomp>\ > > ...last message repeated 9 times > > ...LCP: timeout sending Config-Requests > > > > ...with no other interesting messages occuring. Win2k just doesn't > > seem to be responding. However, in the Win2k log file, I get a > > warning: > > > > "The user connected to port VPN3-4 has been disconnected because the > > > authentication process did not complete within the required amount > of > > time." > > > > So, I'm pretty stumped. Has anyone else out there seen this happen, > > > or have any insight? > > > > Thanks in advance!! > > > > Eli Smith _______________________________________________ pptp-server maillist - pptp-server at lists.schulte.org http://lists.schulte.org/mailman/listinfo/pptp-server List services provided by www.schulteconsulting.com! --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org