I have to ne compatible interfaces on my system. In /etc/conf.modules alias eth0 ne alias eth1 ne options ne io=0x300,0x240 irq=3,10 You list out each cards io address and interrupt. Regards - Karl On Sat, May 27, 2000 at 09:56:25PM -0500, Brian wrote: > I'm setting up a firewall server. It has 3 network cards.. eth0 is to the > DSL, eth1 is to the DMZ, eth2 is to my masquerade. The cards are are > identical NE2000 compatible. I 'modprobe ne.o io=0x240 irq=10' and eth0 > pops out. ifconfig brings the interface up with all the IPs and it > communicates just fine. Apparently I can only load a module once, because > I do 'modprobe io=0x300 irq=3' for my next card, and I don't get an eth1. > Any ideas how I can make 3 identical cards be assigned to eth0, eth1, and > eth2? Thanks. > > -Brian > > --------------------------------------------------------------------- > To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org > For additional commands, e-mail: tclug-list-help at mn-linux.org -- Karl Morgan <ksm at dogbrain.com> http://www.dogbrain.com