FYI - I don't believe that there are any 16MB Diamond Viper 770 that are not
M64 - in other words - it is almost certainly a M64 - it probably came from
a factory built computer (i.e. from Gateway).  I could be wrong, but I don't
believe so.

But to answer your question, XF86 3.3.6 or XF86 4.0.1 should work just fine
for you.  The latter will support 3D accelleration better with the patches
from NVidia's sight.  The latter is also known to have SUID security
problems.

Tom Veldhouse
veldy at veldy.net

----- Original Message -----
From: "Bill Layer" <b.layer at vikingelectronics.com>
To: <tclug-list at lists.real-time.com>
Sent: Wednesday, December 13, 2000 10:17 AM
Subject: [TCLUG] Viper 770 16mb


> Anyone have experience with the Diamod Viper 770 16MB under Linux? This
card
> uses the Nvidia TNT2 chipset (The full chip - not the M64 version IIRC).
Will
> I need to use XF76 4.0 for it?
>
> I can buy one used for about $45 or so..  sound fair?
>
> --
> Bill Layer
> Sales Technician
> <b.layer at vikingelectronics.com>
> _______________________________________________
> tclug-list mailing list
> tclug-list at lists.real-time.com
> https://mailman.real-time.com/mailman/listinfo/tclug-list
>