Re: [TCLUG:3685] listserv is sick

[Ben Kochie <ben@nerp.net>]

there are a couple of monitoring programs, with pager suport.. mostly perl
scripts, both with web output.  big brother, and Spong, both of which are
linked in the freshmeat.net appindex.  spong is a little nicer.. few more
things.. basically it does network tests, and also has the ability to run
a perl script that can gather status of df, load average, process info,
users, and other things.. really nice 

Thank You,
        Ben Kochie (ben@nerp.net)

*-----------------------*  [ - * - * - * - * - * - * - * - ]
| Unix/Linux Consulting |  [ Haiku Error Message:          ]
|  PC/Mac Repair        |  [  Chaos reigns within.         ]
|   Networking          |  [  Reflect, repent, and reboot. ]
| http://nerp.net       |  [  Order shall return.          ]
*-----------------------*  [ - * - * - * - * - * - * - * - ]

 "Unix is user friendly, Its just picky about its friends."

On Mon, 25 Jan 1999, Bob Tanner wrote:

> Jan 24 05:09:08 listserv received a hard drive error:
> 
> Jan 24 05:09:08 kernel: hda: status error: status=0x10 { SeekComplete } 
> Jan 24 05:09:08 kernel: hda: drive not ready for command
> 
> This proceeded until Rick brought the system down and manully fsck'd
> the drives.
> 
> The monitoring software did not pick this error message up. Since we
> mostly monitor for network connectivity.
> 
> Anyone familiar enough with SNMP to know if there is a "linux" MIB
> that will let me get the status of the drives?  If I can get the
> status of the drives, then I poll the listserv from Solstise Domain
> Manager and keep a better watch on the machine.
> 
> After the reboot I am getting:
> 
> ide0: reset: master: ECC circuitry error
> 
> So, we got a bad (or going bad) drive or a dieing IDE controller.
> 
> I'll keep you informed.
> 
> -- 
> Bob Tanner <tanner@real-time.com>       | Phone : (612)943-8700
> http://www.real-time.com                | Fax   : (612)943-8500
> Key fingerprint =  6C E9 51 4F D5 3E 4C 66 62 A9 10 E5 35 85 39 D9 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com
>