TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCLUG:2546] Configuring for 2 Network Adapters



> -----Original Message-----
> From: Tim Neu [mailto:tim@tneu.visi.com]
> Sent: Wednesday, December 09, 1998 9:54 AM
> To: tclug-list@listserv.real-time.com
> Subject: Re: [TCLUG:2546] Configuring for 2 Network Adapters

> On Tue, 8 Dec 1998, Shawn T . Amundson wrote:
>
>
> I know that especially with the 3com Virge card (and possibly other cards
> as well) there was a condition that would cause the MAC address to show as
> 0's.   The fix was to unplug the computer (really, turning it off wouldn't
> work), then plug it back in and restart.   I had this problem on an HP
> Vectra VL6.8.  I fought with it for a long time before I found a web page
> that described the problem, and sure enough; that fixed it...
>

Argh, I might as well wave a chicken at the damn thing.  Guess it's worth a
shot.  Thanks for the tip.  You don't happen to remember the URL of the web
page, by chance?

--
Carl Patten
Systems Administrator
Trimodal Inc.