TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [TCLUG:1371] Diamond Viper 330 AGP
As a general response, running the card at a higher refresh rate will
slow down the card overall if it uses a single-ported variety of RAM.
This is due to more bandwidth being used to do screen refreshes. If the
330 has VRAM or WRAM this comment doesn't apply. Both of those types of
RAM are dual ported with one port read only and one port read/write. If
your main concern is flicker, your best bet is to modify the ambient
light (trade flourescent fixtures for incandescent, avoid direct
sunlight, ...).
As for changing the SVGA server to support 1280x1024@85 hz, manually add
a new mode line. This is documented in the XFree86 man pages and I think
it is in the XFree86 FAQ and a howto as well.
----------
From: Ben Luey
Sent: Thursday, September 24, 1998 12:06 PM
To: tclug-list@listserv.real-time.com; Brad DeJong
Subject: [TCLUG:1371] Diamond Viper 330 AGP
I have a Diamond Viper 330 AGP and I'm running XFree 3.3.2 with the SVGA
server. Is SVGA accelerated? Is this the best server to be using? Also,
I'm running 1286x1024@76.5hz. My monitor and graphics card suppoer 85hz.
Can I do this with this server, or do I need to buy metro-x which claims
support for the viper at 85hz?
Thanks (for this problem and the many others you have helped me solve)
Ben
Ben Luey
lueyb@carleton.edu
---------------------------------------------------------------------
To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
For additional commands, e-mail: tclug-list-help@listserv.real-time.com
Try our website: http://tclug.real-time.com