RE: [TCLUG:480] kernel compile problem o

[Ben Kochie <ben@intexp.com>]

actually.. i found a "signal 11" home page, (i'll look it up when i get
home)  signal 11 is mostlikey a hardware problem.. usually with ram, or a
drive problem.. it happend to a friend of mine consistantly, we re-aranged
the harddrives in his computer, and installed a second cooling fan, so the
drives wern't running hot.. solved his problem. 

On Wed, 1 Jul 1998, Kapoor, Nishikant X wrote:

> >  ----------
> > From:  Carlos Sabo
> > Sent:  Tuesday, June 30, 1998 10:18 PM
> > To:  tclug-list@listserv.real-time.com; Brad DeJong
> > Subject:  [TCLUG:480] kernel compile problem on RH 5.0
> > 
> > Hello, I'm having trouble compiling the kernel on my fresh, stock RH
> > 5.0
> > machine. (Version 5.0 comes with kernel 2.0.32.)  When I type 'make
> > boot'
> > it chokes upon compiling the file ./drivers/block/md.c ...It says:
> > 
> > 	cpp: output pipe has been closed
> > 	gcc: Internal compiler error: program cc1 got fatal signal 11
> > 	make[3]: *** [md.o] Error 1
> > 
> > ...and then 4-7 more lines of errors.
> > 
> > What's going on and what is cc1?
> > 
> > I'd bet I wouldn't be having this problem if I weren't using version
> > 5.0.   
> > 
> > Any pointers would be appreciated.
> > 
> > Carlos
> > 
> [Kapoor, Nishikant]  
> Do you happen to have a Cyrix chip ?
> 
> I had the same problem with my box when I tried installing RH5.0. If
> that's the case, you'll have to apply the Cyrix fix and it should be
> fine then.
> 
> Nishi
> 
> --------To err is human but to really mess it up is computer--------
> mailto:nishikant.x.kapoor@nspco.com   http://www.c3ipros.com/nkapoor
> -----------------------------------~~~------------------------------
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com
>