Re: [TCLUG:18625] Lets have even more eOne fun.

To: <tclug-list@mn-linux.org>
Subject: Re: [TCLUG:18625] Lets have even more eOne fun.
From: Lord Xoi <xoi@mn.mediaone.net>
Date: Sat, 01 Jul 2000 19:39:46 -0500
In-Reply-To: <395E8100.83E33F54@tc.umn.edu>
User-Agent: Microsoft-Outlook-Express-Macintosh-Edition/5.02.2022

on 7/1/00 6:38 PM, Mike Hicks at hick0088@tc.umn.edu wrote:

> Lord Xoi wrote:
>> 
>>> should that be something like `modprobe ide-cdrom' instead?  I guess you
>>> should just look for the correct module by running
>> 
>> modprobe cdrom
>> 
>> modprobe : Can't locate module cdrom
>> 
>> modprobe ide-crom
>> 
>> modprobe : Can't locate module ide-cdrom
> 
> oops, my mistake..  perhaps you need to try `modprobe ide-cd'
> 

same response with that as well.

>>>> Are you sure your cdrom is hdc?
>>> 
>>> this can be determined by looking at the boot logs, BTW.  Try running
>>> `dmesg', or looking in the /var/log/dmesg or /var/log/messages files.
>> 
>> This is my messages file:
> [snip messages]
> 
> Hmm, that looked very strange..  I didn't see (m)any ordinary boot
> messages.  Perhaps all of that stuff got dumped into /var/log/dmesg.
> Either that, or run `dmesg' just after you boot..
> 
> In the boot messages, you should see something similar to this:
> 
> hdd: [model name], ATAPI CDROM drive
> .
> .
> .
> hdd: hdd: ATAPI CD-ROM drive, 512kB Cache
> 
> ...if it's an ordinary IDE drive, at least..
> 

I don't see anything like that.  here is the output from the 'dmesg'
---
Linux version 2.2.14 (root@Laptop.suse.de) (gcc version 2.95.2 19991024
(release)) #1 Sat Mar 25 00:46:59 GMT 2000
Detected 434324331 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 865.08 BogoMIPS
Memory: 62276k/65472k available (1428k kernel code, 412k reserved, 968k
data, 68k init, 0k bigmem)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd9b6
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.12)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 64000K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x10e0-0x10e7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x10e8-0x10ef, BIOS settings: hdc:pio, hdd:pio
hda: ST36421A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST36421A, 6150MB w/256kB Cache, CHS=784/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
LVM version 0.8e  by Heinz Mauelshagen  (4/1/2000)
lvm -- Driver successfully initialized
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3
RAMDISK: Compressed image found at block 0
Uncompressing........................done.
VFS: Mounted root (ext2 filesystem).
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 68k freed
Adding Swap: 136544k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Linux PCMCIA Card Services 3.1.11
  kernel build: 2.2.14 #1 Sat Mar 25 00:46:59 GMT 2000
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf50
  00:0d.0 -> irq 5
  00:0d.1 -> irq 5
Intel PCIC probe: 
  TI 1225 PCI-to-CardBus at slot 00:0d, mem 0x68000000
    host opts [0]: [ring] [serial pci & irq] [pci irq 5] [lat 168/176] [bus
32/34]
    host opts [1]: [ring] [serial pci & irq] [pci irq 5] [lat 168/176] [bus
35/37]
    ISA irqs (scanned) = 3,4,7,10,11,15 PCI status changes
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x290-0x297
0x370-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
VFS: Disk change detected on device fd(2,0)
---

Follow-Ups:
- Re: [TCLUG:18625] Lets have even more eOne fun.
  - From: Scott Dier <dieman@ringworld.org>

References:
- Re: [TCLUG:18625] Lets have even more eOne fun.
  - From: Mike Hicks <hick0088@tc.umn.edu>

Prev by Date: Re: [TCLUG:18625] Lets have even more eOne fun.
Next by Date: Re: [TCLUG:19391] RE: Spare parts
Prev by thread: Re: [TCLUG:18625] Lets have even more eOne fun.
Next by thread: Re: [TCLUG:18625] Lets have even more eOne fun.
Index(es):
- Date
- Thread