Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) ISDN over 24 Channel T1
I am trying to find out some [specific] information about terminating
ISDN calls via a T1 (rather than PRI). We would like to do this on
a MAX4048. The 4048 is for ISDN only.... currently it is running with
a PRI, and all modem cards have been removed. Due to tarrifs, we can
purchase T1's *much* cheaper than PRI's. I have searched the archives
and have read numerous posts stating that ISDN calls can be terminated
on non-PRI T1's, with the caveat that the callers will only be
able to get 56kbps rather than 64kbps. My questions are:
1) Are any of you actually running this sort of setup? If so, I would greatly
appreciate it if we could exchange a couple of emails.
2) Is multilink still possible? In other words, can users combine
their 2 ISDN channels to get a 112kbps connection the same way that
they can get a 128kbps connection with a PRI?
3) Is there any special telco provisioning that needs to be done to get
this to work on a non-PRIT1?
Any info that anyone can provide on this topic, _especially_ info from
first hand experience, would be *greatly* appreciated!
Thank you!
___________________________________________________________________________
Joe Pautler, E.I.T. University at Buffalo
CIT/OSS Network Engineering 224 Computing Center
http://www.oss.buffalo.edu/~pautler (716) 645-3536
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>