Re: (ASCEND) 6096 Ether Stat

["Ricardo Freire" <ricardo@allways.com.br>]

Hi Ken,

As you can see in an old thread (below), several people (including me) have
asked both this list and Ascend Support for this answer, but had no
response. I gave up five months ago...

Good luck however! :-)

Cheers,
Ricardo Freire, MCP

----- Original Message -----
From: Ricardo Freire <ricardo@allways.com.br>
To: <ascend-users@max.bungi.com>
Sent: Quinta-feira, 22 de Abril de 1999 13:07
Subject: Re: (ASCEND) Very different Ethernet x Wan data(?!)


| Thank you Peter,
|
| >Sounds like the Max hears a lot of traffic on the Ethernet that it
doesn't
| >forward out, which might be normal for your network. You could look at
the
| >various "show" stats to see what type of traffic it is, which could be a
| >clue as to who's doing the talking. Beyond that, it's packet analyzer
time.
| >Or, you could put the Max on it's own port on an Ethernet switch.
|
|
| This MAX6000 *is* on it's own port in the switch!
| When I was using 6.1.24 (which has a broken code for E1), this box was
using
| 10Mbits, and the figures were near the same fashion than we have on a
| MAX4000.
| When I upgraded to 7.0.4, it went to 100Mb full-duplex, and this figures
| started to grow in this manner.
| So THIS is the reason I cannot understand those figures.
|
| Again, I ask Ascend to say something about it. We DO NOT deserve this
| silence.
|
| Cheers,
| Ricardo Freire
|
| ++ Ascend Users Mailing List ++
| To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
| To get FAQ'd: <http://www.nealis.net/ascend/faq>
|

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>