Re: (ASCEND) Filters on Wan Side

["francois.trudeau" <francois.trudeau@dslnet.com>]

7.0.4 code on the DSL max also has huge problems with the FL10 T1 cards.  It
seems to have a problem with administratively bouncing individual ports.  When
you bring a port down, (set enabled = no in the t1 profile) and then bring it
back up, the frame relay profile doesn't re-initialize.  Everything physical is
fine, it just doesn't pass traffic.  Even the profiles on the pipe come back up.
The only way to get it back is to bounce the card or the whole chassis.  Its a
very weird problem.

ft

Chris A. Epler wrote:

> On Tue, 18 May 1999, Eric Reeves wrote:
>
> > I've successfully setup a filter and applied it to the Ethernet interface
> > to block finger requests directed towards port 79 of the Max itself.  I'd
> > now like to apply this filter to the WAN interfaces also.  If I were to
> > setup Ethernet/Answer/Session Options/Data Filter to my filter #, would
> > the filter then effectively be applied to the WAN interface of every
> > dialup user?  We are using Radius, so would this need to be stuck into a
> > default profile of some type, or are those filters also still placed on
> > the Ethernet interface only?
>
> We ran into problems with 7.x and dropped back to 6.1.24 which has been
> relativly good so far and is what we're running on all of our MAXes now.
> 7.0.4 has a lot of warnings, a couple reboots and a mysterious lockup that
> left us with a very bad taste in our mouth.
>
> -----------------------------------------------------------------------------
> Chris A. Epler - K4UNX - Broadband Network Services, Inc. - (804) 817-7300
> Linux - Operating System for a GNU Generation - http://www.linux.org
> 99 SL2m MRd AC SP CC ABS TC AU+++ F PW PL KE T2N SR L NG ODO: 5839 miles
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>