Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Is it impossible to call a Cisco with a Max?
Hello!
I have ask the same question some days ago (perhaps with a litle
bit wrong subject - I don't want to compare both):
I want to call a Cisco 4500/11.3 with our Max 2000/5.0Ap51:
Confiuration of Max and Cisco as attachment.
[ parts in <..> are everywhere the same ]
I think this is a Cisco problem with IPCP, but the Cisco admin
said that this could not be the problem.
Can anybody tell me, what I or the Cisco admin can do to get a connect?
TIA
wandialout 128 output via hex2ppp and vi
(http://www.mlink.net/~vandry/hex2ppp.html) with my commments:
---------------------------------------------------------------------------
XMIT-18:: LCP ConfReq <id=1> <mru 05f4> <endpoint 03 00 c0 7b 6d b7 fe>
RECV-18:: LCP ConfRej <id=1> <endpoint 03 00 c0 7b 6d b7 fe>
XMIT-18:: LCP ConfReq <id=2> <mru 05f4>
RECV-18:: LCP ConfAck <id=2> <mru 05f4>
RECV-18:: LCP ConfReq <id=165> <auth c2 23 05> <magic c4770730>
XMIT-18:: LCP ConfAck <id=165> <auth c2 23 05> <magic c4770730>
Good LCP is OK
RECV-18:: CHAP ...
XMIT-18:: CHAP ...
RECV-18:: CHAP 03 c3 00 04
Good CHAP is OK
RECV-18:: CCP ConfReq ae 00 0a 17 06 00 01 02 01
RECV-18:: <proto=8207> 01 97 00 04
I think Cisco want to do 82 07 "Cisco Discovery Protocol Control"
XMIT-18:: CCP ConfReq 01 00 09 11 05 00 01 03
XMIT-18:: IPCP ConfReq <id=1> <addr 172.29.24.2>
I think Max want to do IP
XMIT-18:: CCP ConfRej ae 00 0a 17 06 00 01 02 01
XMIT-18:: LCP ProtRej 03 00 0a 82 07 01 97 00 04
Max don't want 82 07 "Cisco Discovery Protocol Control"
RECV-18:: CCP ConfAck 01 00 09 11 05 00 01 03
RECV-18:: LCP ProtRej a6 00 10 80 21 01 01 00 0a 03 06 ac 1d 18 02
RECV-18:: CCP ConfReq af 00 09 11 05 00 01 01
Cisco don't want IP, but the Cisco admin said, Cisco can talk IP.
XMIT-18:: LCP TermReq 01 00 04
Max says: good bye
---------------------------------------------------------------------------
Debug log of the Cisco:
---------------------------------------------------------------------------
Se0:1 PPP: Treating connection as a callin
Se0:1 PPP: Phase is ESTABLISHING, Passive Open
Se0:1 LCP: State is Listen
Se0:1 LCP: I CONFREQ [Listen] id 1 len 17
Se0:1 LCP: MRU 1524 (0x010405F4)
Se0:1 LCP: EndpointDisc 3 00c0.7b6d.b7fe (0x13090300C07B6DB7FE)
Se0:1 LCP: O CONFREQ [Listen] id 254 len 15
Se0:1 LCP: AuthProto CHAP (0x0305C22305)
Se0:1 LCP: MagicNumber 0xBEAC3BC5 (0x0506BEAC3BC5)
Se0:1 LCP: O CONFREJ [Listen] id 1 len 13
Se0:1 LCP: EndpointDisc 3 00c0.7b6d.b7fe (0x13090300C07B6DB7FE)
Se0:1 LCP: I CONFACK [REQsent] id 254 len 15
Se0:1 LCP: AuthProto CHAP (0x0305C22305)
Se0:1 LCP: MagicNumber 0xBEAC3BC5 (0x0506BEAC3BC5)
Se0:1 LCP: I CONFREQ [ACKrcvd] id 2 len 8
Se0:1 LCP: MRU 1524 (0x010405F4)
Se0:1 LCP: O CONFACK [ACKrcvd] id 2 len 8
Se0:1 LCP: MRU 1524 (0x010405F4)
Se0:1 LCP: State is Open
LCP is OK
Se0:1 PPP: Phase is AUTHENTICATING, by this end
Se0:1 CHAP: O CHALLENGE id 237 len 29 from "<Name B>"
Se0:1 CHAP: I RESPONSE id 237 len 27 from "<Name A>"
Se0:1 CHAP: O SUCCESS id 237 len 4
Se0:1 PPP: Phase is UP
CHAP is OK
Se0:1 CCP: O CONFREQ [Closed] id 29 len 10
Se0:1 CCP: LZSDCP history 1 check mode SEQ process UNCOMPRESSSED \
(0x170600010201)
Se0:1 CDPCP: O CONFREQ [Closed] id 193 len 4
Se0:1 IPCP: I CONFREQ [Not negotiated] id 1 len 10
Se0:1 IPCP: Address 172.29.24.2 (0x0306AC1D1802)
Se0:1 LCP: O PROTREJ [Open] id 255 len 16 protocol IPCP \
(0x80210101000A0306AC1D1802)
I think this is the problem, but the Cisco admin said the same
configuratio works this other router (not Ciscos).
Se0:1 CCP: I TERMACK [REQsent] id 29 len 4
Se0:1 LCP: I PROTREJ [Open] id 3 len 10 protocol CDPCP (0x820701C10004)
Se0:1 CDPCP: State is Closed
Se0:1 CCP: State is Closed
Se0:1 PPP: Phase is TERMINATING
Se0:1 LCP: State is Closed
Se0:1 PPP: Phase is DOWN
---------------------------------------------------------------------------
--
Dipl.-Inform. Klaus Noack
Syscomp GmbH / Abteilung DFUE | Telefon: +49-821-4201-328
August-Wessels-Strasse 5 | Telefax: +49-821-414092
D-86154 Augsburg / Germany | mailto:k_noack@syscomp.de
!
version 11.3
!
hostname <Name B>
!
enable secret 5 ?????????????
enable password ?????????????
!
username <Name B> password 7 ??????????????
username <Name A> password 0 <passwd>
ip host <Name A> 172.29.24.2
isdn switch-type primary-net5
!
controller E1 0
pri-group timeslots 1-31
description Anschluss Lucent Definety S2M
!
!
interface Ethernet0
description Hausnetz <Name B>
ip address 172.28.100.1 255.255.0.0
media-type 10BaseT
!
interface Serial0:15
description Anschluss Lucent Definety S2M
no ip address
encapsulation ppp
dialer pool-member 1
isdn caller 0821<Num A>
isdn calling-number <Num B>
compress stac
ppp max-bad-auth 3
ppp callback request
ppp authentication chap pap
!
!
interface Dialer12
description Verbindung Augsburg
ip address 172.29.24.1 255.255.255.0
encapsulation ppp
dialer remote-name <Name A>
dialer string 0821<Num A>0 class kunden
dialer hold-queue 32 timeout 20
dialer pool 1
dialer-group 1
ppp authentication chap
!
router rip
no validate-update-source
redistribute static
network 172.28.0.0
!
no ip classless
ip route 10.1.0.0 255.255.0.0 172.29.24.2
!
map-class dialer kunden
dialer idle-timeout 180
dialer fast-idle 30
dialer enable-timeout 10
dialer wait-for-carrier-time 60
dialer-list 1 protocol ip permit
snmp-server community ?????? RO
!
!
end
START=ROUTE=500=5
Name=xxxxxx
Active=Yes
Dest=172.28.0.0/16
Gateway=172.29.24.1
Metric=8
Preference=100
Private=No
END=ROUTE=500=5
...
START=CONN=500=0
Use Answer as Default=Yes
Force 56=No
Profile Reqd=Yes
Id Auth=Require
Assign Adrs=No
Encaps...MPP=Yes
Encaps...MP=Yes
Encaps...PPP=Yes
...
PPP options...Route IP=Yes
PPP options...Route IPX=No
PPP options...Bridge=No
PPP options...Recv Auth=CHAP
END=CONN=500=0
...
START=CONN=500=22
Station=<Name B>
Active=Yes
Encaps=PPP
PRI # Type=Unknown
Dial #=030555<Num B>
Calling #=30555<Num B>
Route IP=Yes
Encaps options...Send Auth=CHAP
Encaps options...Send PW=<passwd>
Encaps options...Recv PW=<passwd>
Encaps options...Link Comp=Stac-9
Encaps options...VJ Comp=No
Ip options...LAN Adrs=172.28.100.1/16
Ip options...WAN Alias=172.29.24.1
Ip options...IF Adrs=172.29.24.2/24
Telco options...Callback=Yes
Telco options...Data Svc=64K
END=CONN=500=22
...
START=ETHERNET=500=0
Module Name=
Ether options...IP Adrs=10.1.1.1/16
Ether options...2nd Adrs=0.0.0.0/0
...
WAN options...Dial Plan=Trnk Grp
WAN options...Ans 1#=<Num A>
...
START=SYSTEM=0=0
Name=<Name A>
Location=Augsburg