(ASCEND) 7.2.2 of MultiVoice for the MAX

[Matt Holdrege <matt@ascend.com>]

Release 7.2.2 of MultiVoice for the MAX has been given to Customer Support.

The Release 7.2.2 release for the MAX family contains the following:
Corrections:

TR: 4922 Turn off echo suppressor tone on all outdial modem calls.
TR: 1000221 MAX fails to send sieze ack after sieze received for New Zealand
* R2 dialout becomes stuck when R2 digits are dropped
* MultiVoice: MAX 6000 Ethernet Driver exhibits cyclic packet loss problem
at 100 Mbit
* Multivoice: VDSP=92s incorrectly put on suspect list
* MAX2000 failed to detect DTMF tones
* FE17 on M6000-T1 under load with collect DNIS/ANI=YES.
* Multivoice: Channels stuck in D
* E1/R2 DNIS can be truncated when CLID is requested for New Zealand.
* MultiVoice: H.225 incoming connections have no timeout
* MultiVoice: Ethernet IP address changed while call is up caused system crash
* MultiVoice: Gateway responds to H.225 release code with overlapping ring
and voice announcement
* MultiVoice: Near End Cut Thru VOIP profile parameter doesn't stop H.245
* MultiVoice: Improvements on DTMF out-of-band silencing voice problem

Known Issues:
* T.38 Real-time fax is not supported in this release
* Certain features and enhancements in this software are designed for use
in MultiVoice networks using Release 2.1.0 of the MultiVoice Access
Manager. Networks using Release 2.0.0 of the MultiVoice Access Manager may
not be able to fully utilize all the features available in this software
version of the MultiVoice Gateway.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>