Re: (ASCEND) Ticket #802135 - Disconnect Problems on 4048 with 7.0.1

["Mark E. Dunlap" <mdunlap-NOSPAM@ds.net>]

I can not answer what the problem is but I have some ideas.
I have seen problems with 33.6K modems or 56K modems that can not
get a good 56K connection for what ever reason.  I believe this
is a problem with Ascend's V.90/K56Flex support.  These same users
are able to dial into my Ascend 4000 with V.34 modems with out
any problems.  As soon as they attempt to dial one of the 56K
servers running even just 6.1.0 or 7.0.0, they will train for
ever and then hang up... Or they will connect but nothing will
work.

Just my 2 cents.  They may or may not mean a thing.
Mark E. Dunlap

"Steven T. Pierce" wrote:
> 
> I have had several users complaining of disconnects as of recent.
> 
> We are running Ascend Max 4048 with software 7.0.1 (no OSPF or RIP)
> 
> We have 2 locations with 144 ports (3 boxes) fed by Channelized T1s
> 
> We also have 2 locations with 46 / 92 ports fed by PRI.
> 
> Problems affect both locations and they are in different bell
> territories (Ameritech PRI and Bellsouth CT1 and PRI)
> 
> How can I absolutely, positively guarantee that every setting in the Max
> 
> does not cause idle disconnects ( under ether ... answer...  mod
> config... etc...)  I need explicit directions as I have double and
> triple checked that I have Idle off or set to 0 (zero) every where I can
> 
> find it.
> 
> The disconnects codes being reported are :
> 
> 11   -  DCD detected, but went inactive    (what does this mean ?????)
> 
> 45  -   PPP LCP got terminate request from far end   (what does this
> mean ?????)
> 
> 100 -   Session timeout  (what does this mean, does it indicate that the
> 
> Max is discontenting the user, or could it mean other things ?)
> 
> 185  -  Remote End hung up - signal lost form far end  (what does this
> mean ????  what would be an example that could cause this ?)
> 
> I need specifics and examples to provide to my customers with the
> complaints as it is starting to cause me to lose business...
> 
> Anyone on the list have any ideas ? suggestions ? help ?
> 
> Steven T. Pierce
> stp@dynasty.net
> Dynasty Online, Inc.
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>


"Steven T. Pierce" wrote:
> 
> I have had several users complaining of disconnects as of recent.
> 
> We are running Ascend Max 4048 with software 7.0.1 (no OSPF or RIP)
> 
> We have 2 locations with 144 ports (3 boxes) fed by Channelized T1s
> 
> We also have 2 locations with 46 / 92 ports fed by PRI.
> 
> Problems affect both locations and they are in different bell
> territories (Ameritech PRI and Bellsouth CT1 and PRI)
> 
> How can I absolutely, positively guarantee that every setting in the Max
> 
> does not cause idle disconnects ( under ether ... answer...  mod
> config... etc...)  I need explicit directions as I have double and
> triple checked that I have Idle off or set to 0 (zero) every where I can
> 
> find it.
> 
> The disconnects codes being reported are :
> 
> 11   -  DCD detected, but went inactive    (what does this mean ?????)
> 
> 45  -   PPP LCP got terminate request from far end   (what does this
> mean ?????)
> 
> 100 -   Session timeout  (what does this mean, does it indicate that the
> 
> Max is discontenting the user, or could it mean other things ?)
> 
> 185  -  Remote End hung up - signal lost form far end  (what does this
> mean ????  what would be an example that could cause this ?)
> 
> I need specifics and examples to provide to my customers with the
> complaints as it is starting to cause me to lose business...
> 
> Anyone on the list have any ideas ? suggestions ? help ?
> 
> Steven T. Pierce
> stp@dynasty.net
> Dynasty Online, Inc.
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>